Power

This chassis does not require a power board like our Core and Mini line of products. Instead, it is powered by 4 PATA connectors run directly from the PSU to the backplane at the indicated areas below. 2 extension cables are included with purchase to help you.

Wiring

Recommended Wiring

Use 2 separate cables with 2 connectors on each to power the backplane.

A single cable with 4 connectors can also be used, as long as the wiring is 16AWG.

Avoid SATA-to-PATA Adapters

Using a SATA-to-PATA adapter is not recommended.

Optional Power Board

A power board can be purchased separately for PWM fan control and usage of HakoFoundry.